5.0 out of 5 stars Great case for protecting your Starlink Mini

2026-02-09    -Madclown

This case works perfect. My Mini fits perfectly inside the precut foam. The case is tough and durable for taking on road trips. There's additional room to store a 12volt adapter under the dish. I can throw case in with our other gear knowing it's well protected. Overall I think it's a good value considering the protection your getting.

5.0 out of 5 stars Everything fits!

2026-01-28    -PattyCake

Picked up this case to hold my Starlink Mini, and it holds the device, cord, has cutouts for the plug and mounting piece. The hard shell feels sturdy and it is lined with thick foam for extra protection. I was able to leave the silicone cover on my starlink, and toss the mounting suction cups and carabiners in with the cord, and still close this up easily. There is an easy to install shoulder strap, making this easy to tote around. I love the green color with red accents, and appreciate how compact this is, with just the right amount of space to hold all of my equipment.

5.0 out of 5 stars Great case for protecting your Starlink Mini

2026-02-26    -Madclown

This case works perfect. My Mini fits perfectly inside the precut foam. The case is tough and durable for taking on road trips. There's additional room to store a 12volt adapter under the dish. I can throw case in with our other gear knowing it's well protected. Overall I think it's a good value considering the protection your getting.

4.0 out of 5 stars Sturdy, but VERY tight foam

2026-02-02    -Michael

If you have a silicon sleeve for your Mini, you'll need to remove it. That 3/4mm all the way round makes it impossible to get in the foam cutout without a thin shim for it to slide on and be levered in.Lots of room in the cord area. I don't have any form-fitting batteries to test in the pole mount slot but if you have a variety of battery banks they will likely fit in with the cord.

4.0 out of 5 stars Sturdy, but VERY tight foam

2026-02-11    -Michael

If you have a silicon sleeve for your Mini, you'll need to remove it. That 3/4mm all the way round makes it impossible to get in the foam cutout without a thin shim for it to slide on and be levered in.Lots of room in the cord area. I don't have any form-fitting batteries to test in the pole mount slot but if you have a variety of battery banks they will likely fit in with the cord.

5.0 out of 5 stars Good Reasonably Priced Storage Box for the Starlink Mini

2026-02-06    -PowerShopper

It fits the Starlink Mini as advertised. It has enough room to accommodate the 12V charging cord for your car in addition to the charging cord it came with. It seems sturdy. The clasps seem secure. The internal Styrofoam-like padding (cut to accomodate the various parts that come with the Starlink Mini) seems like it will be adequately protective.

5.0 out of 5 stars Good Reasonably Priced Storage Box for the Starlink Mini

2026-02-15    -PowerShopper

It fits the Starlink Mini as advertised. It has enough room to accommodate the 12V charging cord for your car in addition to the charging cord it came with. It seems sturdy. The clasps seem secure. The internal Styrofoam-like padding (cut to accomodate the various parts that come with the Starlink Mini) seems like it will be adequately protective.

5.0 out of 5 stars Get This Case..

2026-02-21    -hillbilly willie

At first glance, this is a knock-off of a Nanuk case. There's slight differences, like the MEKETT case has actually thoughtful indentations in the corners of the lid for stacking the same size cases. Some of the design and protection features are also slightly different, like the thinner bolsters around the latches on this case. Speaking of latches, these are also a grasp/lever type very similar to Nanuk's Power Claws. I have a Nanuk 920 with TSA Power Claws, and for S&Gs, I got the cases together to compare the TSA latches to the MEKETT latches, and the latter are slightly narrower. I did not measure hinge/latch points or OAL to see if the TSA Power Claws would work, as I'm not interested in putting latches costing more than this case on. Size-wise, this case falls between a Nanuk 910 and 920; closer to the latter. In Nanuk sizing, IDK if that would equate to a 915.Anyway, on to the case. It's definitely not as solid as a Nanuk and maybe not as much as a HF Apache case, although the MEKETT is smoother opening than a HF. But it's decently solid for holding a Starlink Mini, as it was intended for. It has a cheap closed-cell foam, which is not necessarily knocking it. In fact, it's nice it has closed-cell foam, as open-cell can get dirty and wear fast when repeatedly used. You'll note in the pictures that the lid hinges are one-sided blind; not that one could press out the hinge pin because of the reinforcing bolsters, but even without, there's only access to one side-nice touch. And regarding security, there's through-holes in the body and lid for a lock. Not as large an area as Nanuk cases, nor the metal reinforcement, but enough to fasten a padlock. Finally, there is ample room below the Mini (which fits snugly) for the cable and various accessories like a 12V car cable.Also, you can see this case has a pressure-balance valve; I take it to be self-regulating like a Nanuk, as it does not have the rotary on-off feature like a HF case; another nice touch. And there's the clear plate above the handle for an ID tag; again, a good inclusion. Finally, there's a comfortable handle and included carry strap. Really, this case punches above its weight class and price point. Would I use this for truly valuable good, especially depending upon the water resistance and untested pressure valve? Conditionally, I might. It's by no means flimsy. Add a cable lock to restrain it to something solid, and an AirTag within a waterproof holder, and you'll be good.

5.0 out of 5 stars Great Fit, Room to Spare

2026-01-11    -Zach B.

Great case. Not as beefy as a Pelican case but it doesn't need to be. The contents aren't super heavy and considering what it's for you want it to be light. It's not cheaply made, just not that "jump up and down on it" material of expensive cases. The cutouts are sized nicely and frankly there's an abundance of room here. It didn't need to be as deep as it is, but given the footprint of the terminal it would almost be weird if it was thinner and the extra space has proved handy for bonus cables, tripod, and I even added a foldable solar panel to feed power to my PeakDo battery for the Starlink. The cutout for the AC adapter snugly fit a smaller Anker USB-C PD brick with room to spare. Overall this is a nice home base for the terminal and all its accessories, with room to fit all your peripheral add-ons.

5.0 out of 5 stars Perfect!

2026-02-26    -Ken and Sherry

This is great! Everything fits, it’s tight and appears dust and waterproof. Perfect for the Jeep and trailer. Price is very competitive, if you have a Starlink, buy one.