5.0 out of 5 stars Great product

2026-01-05    -Sue

Fits perfect on my car vent. Wanted it for gps. Works great

5.0 out of 5 stars Great product

2026-02-08    -Sue

Fits perfect on my car vent. Wanted it for gps. Works great

1.0 out of 5 stars Extremely disappointed !! Not as described at all, it does not hold the phone

2026-03-01    -Deanne R. Bonfield

I loved the design the sleet look, but it does not hold my iPhone 17 Pro that it is designed for a MagSafe case. I was also told that with the pop ring that’s magnetic I have in the back of my case would be no problem that made it even worse so I had to take that off each time in order to put it on my car phone holder so it just doesn’t work for me. I’m very very disappointed because I was told by Amazon that it would work perfectly, but that is not the case so I am returning it. It was a bad review.

4.0 out of 5 stars MagSafe strong, quality high, tilt is tight, vent grabbers short. Too easy to pull off from vent.

2026-02-14    -Chris S. Markham

The MagSafe attachment is solid as this is Apple-specified and this feels v. strong. It handles my 15 Pro Max easily, no vibration or worries in hard cornering. However, it's so strong that it can overwhelm the fairly short fingers that grab the vent when I pull the phone off the mount. This will likely depend a lot of your vent design. Even adjusting the pivot on the mount to orient the phone can move the fingers (does sometimes your map not pivot to horizontal on the mount after you input your dest? while holding it?). This is something to pay attention to with any vent mount, I suppose. Since mounting is fairly fussy, it makes me not want to take it off when I leave the car. But it also looks nice, expensive, in aluminum, and might be a target for thieves. So I want to remove it when parked.That brings up another potential issue. If you have a shallow center console, the depth of the pivot mount makes it deeper (even with the stubby fingers) than you might expect. So then it's the glovebox. And who has room for anything else there? Side pocket? Too big to go under the lid. But it doesn't work at all as any kind of desk stand, so no reason to take it with, the other option. Probably wouldn't be an issue in my truck, which has more storage space than my small car. First world problems.

Refurbished

2026-02-02    -Amazon Customer

Refurbished

5.0 out of 5 stars Great Buy - Simplistic Gadget

2026-02-02    -Jess H

The media could not be loaded. I was looking for a simple, kind of modern-looking, yet durable MagSafe phone mount for an iPhone, mainly while teaching a teenager how to drive and to not touch his phone - it's in your line of sight, you will live for 20 minutes of no interaction LOL (and also got it for me, I mean it's my car). It magnetizes to both my MagSafe phone case and MagSafe socket, and the strength is pretty darn good. Every time I remove my phone, the socket is still left on the Belkin.I had both this non-charging Belkin and the charging Belkin that I was looking into. I saw reviews of the other Belkin wireless car charger but the reviews weren't really too positive as far as charging goes and stated that the charge wasn't that great or it didn't charge quickly or it eventually lost charge completely. I already have phone cords in my vehicle so TBH that wasn't really a feature I needed - I just needed a phone mount that I didn't have to un/screw into my air vents, didn't have four sides to it that had to hold your phone in place, was plastic & cheap - I wanted MagSafe only. I also did not want a mount with any sticky stuff that goes on your window or your dashboard. I'm a simple kinda gal. I want simple stuff.Belkin delivered. The size was discreet, although having an air vent mount will always block some portion of your air/air vent, that is expected and I'm totally fine with that. Belkin has a shorter top area and a longer bottom so it succeeded in not blocking my air vent too bad (which are vertical). If anything, the position of the MagSafe on my phone is what made the phone block the air/vent. The gray prongs that go into your vent.... Now, I was going to give this one star off but changed my mind (really should only be a half of a star) and not because I'm disappointed with the product itself or because of Belkin's design flaws per se. So, the gray prong that goes into your vent is silicone. That part is fantastic! No slipping at all while driving. The only time the prongs come off the vent is when I try to pull my phone off the mount too hard when I'm getting out/done, if I pull my phone to the side/in a sideways manner, the mount stays in place. They made the prongs a little too short. It would probably help just a little if the prongs were a tad bit longer, but I can understand why they didn't risk that because some vehicles have air vents with shorter panels and some with longer so it's better to just fit all vehicles by making the prongs short, I guess. The prongs are attached to what I call a rotator cuff (yes, it was fitting to give that name). That rotator cuff obviously moves in a circular motion but it sure as heck needs some WD40 because when I try to adjust the Belkin to accomodoate my air flow, the rotator cuff will sometimes not move and the prongs just remove themselves from the air vent. Did that make sense? You see why I was interested in longer prongs? Maybe that would have helped. Maybe not. I can still move the rotator cuff but in doing so, I have to push the Belkin into the vent and then adjust the position.Hope that was easy to understand. That was really the only issue I had with it, but nonetheless, it is a such a great product, I am a happy customer that I found Belkin (no idea why I settled on cheap flimsy options before a review of another product brought me to Belkin's page) but hey... I will definitely be a returning customer.

5.0 out of 5 stars BEST VENT PHONE MOUNT !!!!

2026-02-08    -Eliani Caobi Perez

I LOVE THIS ! I had the sticky type of phone mount and let me tell you that having this one it’s sooooo much better will not ruined the leather of your dash , I had the sticky one for like a week and I’m glad I switched when I took it off there was a dent already on it ! It works great and it keeps your phone from overheating since is in the vent , I have an iPhone 15 pro max and holds well the weight of it , easy to mount and very clean and elegant design.

5.0 out of 5 stars Best vent holder

2026-01-05    -AP

This vent phone holder is the best! My phone stays on it and it fits snug in the vents would recommend it!

Cumple perfectamente su función

2026-02-26    -alejandro

Hasta el momento es un soporte que tiene buena calidad, en cuanto a la tecnología MagSafe, es compacto, y tiene buen aspecto

MagSafe

2026-03-04    -Oscar

Smidigt att ha i bilen :)